Nolatron Load Suppressor

Part#: 30165

If a load is a solenoid, a motor, a relay coil, or a transformer, it will have inductive properties.  When a relay contact breaks the current to an inductor, a high voltage will result across the contact.  This may damage the contacts when they begin to seperate. 

The 30165 load suppressor contains a metal-oxide varistor (MOV) that limits the level of transient voltage.  It also contains an R/C snubber nerwork that limits the electromagnetic interference (EMI) of the transient.   This greatly reduces the damage that transients can cause to relay contacts and also reduces the influence they have on electronic equipment.

Specifications:

Max. Applied Voltage:  250VAC
Max. Transient Energy:  30 joules @ 1000us
Max. Surge Current:  4000AMPS @ 20us
Typical Power Consumption:  1.2 Watts @ 250VAC
Temperature Range:  0 - 120 F